交换机功能 function of pbx/pabx |亿泰通讯

交换机功能

关键字：交换机功能、电话交换机主要功能，程控交换机功能介绍
一、交换机基本功能：
<a href="http://www.zjetime.com">交换机</a><a href="http://www.zjetime.com">集团电话</a>
1、话务台停放来电并提示分机（Attendant Camp—On with Tone Indication）
2、话务台控制的会议（Attendant - Controlled Conference）
3、话务台(Attendant Console)
4、话务台键盘(Attendant Keypad)
5、话务台锁定(Attendant Lockout)
6、话务台环路释放(Attendant Loop Release)
7、话务台强插(Attendant Override)
8、自动回呼(Automatic Recall)
9、自动回呼一Dterm(Automatic Recall-Dterm)
10、语音通告(Announcement Service)
11、交替路由(Alternate Routing)
12、声音指示控制(Audible Indication Control)
13、帐户代码(Account Code)
14、话务台夜间转移(Attendant Night Transfer)
15、授权码(Authorization Code)
16、自动中继测试(Automatic Trunk Test)
17、授权码—专线呼入路由(Authorization Code-Tie Line Incoming Routes)
18、自动/人工内部通话(Automatic /Manual Intercom)
19、 AC拆线(AC Clearing)
20、账户代码—话务台(Account Code-Attendant)
21、全域广播(All Zone Paging)
22、自动夜间服务切换(Automatic Change Of Night service)
23、语音通告—话务台(Announcement Service –Attendant)
24、话务台到话务台的呼叫(Attendant To Attendant Calling)
25、自动返回空闲(Automatic Idle Return)
26、自动号码验证(Automatic Number Identification –ANI)
27、自动话务员(Automated Attendant)
28、应答保留—话务台(Answer Hold-Attendant)
29、授权码不显示(Authorization Code Display Elimination)
30、话务台溢出(Attendant Overflow)
31、附加会议功能—8方(Add-on Conference –8party)
32、模拟来电显示（SM类别）(Analog Caller ID)
33、模拟来电显示—分机侧(Analog Caller ID-Station)
34、账户代码强插功能(Account Code Override)
35、匿名呼叫限制(Anonymous Call Block)
36、忙线分机显示—灵活的(Busy Lamp Field – Flexible)
37、忙线分机验证(Busy Verification)
38、老板/秘书强插功能—Dterm (Boss/Secretary Override - Dterm)
39、热线功能(Brokerage – Hot Line)
40、老板/秘书留言信息等待灯控制(Boss / Secretary – Message Waiting Control Lamp)
41、老板/秘书转移(Boss / Secretary Transfer)
42、热线功能—外线(Brokerage – Hot Line – Outline)
43、中继使用截断(Blocking Of Trunk Usage)
44、无条件转移至话务台(Blind Transfer To Attendant)
45、无条件转移至分机(Blind Transfer To Station)
46、回叫(Call Back)
47、回叫- Dterm(Call Back - Dterm)
48、遇忙呼叫转移(Call Forwarding – Busy Line)
49、遇忙呼叫转移- Dterm(Call Forwarding – Busy Line - Dterm)
50、无应答呼叫转移(Call Forwarding - Don’t Answer )
51、无应答呼叫转移- Dterm(Call Forwarding - Don’t Answer - Dterm)
52、无条件呼叫转移(Call Forwarding – All Calls )
53、无条件呼叫转移- Dterm(Call Forwarding – All Calls - Dterm)
54、呼叫保留(Call Hold)
55、呼叫保留- Dterm(Call Hold - Dterm)
56、呼叫代接-群组(Call Pickup – Group)
57、呼叫代接-群组- Dterm(Call Pickup – Group -Dterm)
58、呼叫过程指示(Call Processing Indication)
59、呼叫队列(Call Queuing)
60、呼叫转移-话务台(Call Transfer – Attendant)
61、无条件呼叫转移(Call Transfer – All Calls )
62、无条件呼叫转移- Dterm(Call Transfer – All Calls -Dterm)
63、呼叫等待-切换通话方(Call Waiting – Terminating)
64、呼叫等待指示灯(Call Waiting Lamp)
65、 CCSA选取(CCSA Access)
66、服务等级-指定分机组(Class Of Service – Individual)
67、磋商呼叫保留(Consultation Hold – All Calls)
68、磋商呼叫保留- Dterm(Consultation Hold – All Calls -Dterm)
69、集中式话务员业务(Centralized Attendant Service (CAS)
70、代码呼叫选取(Code Calling Access)
71、被叫分机状态显示-Dterm(Called Station Status Display-Dterm)
72、主叫号码显示- Dterm(Calling Number Display -Dterm)
73、呼叫转移至语音通告(Call Forwarding- Intercept/Announcement)
74、呼叫转移-强插(Call Forwarding – Override)
75、呼叫等待-应答- Dterm(Call Waiting – Answer -Dterm)
76、无条件呼叫转移-外线(Call Forwarding – All Calls – Outside )
77、呼叫驻留(Call Park)
78、呼叫代接-直接(Call Pickup – Direct)
79、呼叫等待-通知忙线分机(Call Waiting – Origination)
80、后续拨号-话务台(Consecutive Dialing – Attendant)
81、呼叫计次(Call Metering )
82、被叫号码显示-话务台(Call Number Display – Attendant)
83、呼叫转移-忙线-外线(Call Forwarding – Busy – Outside)
84、后续缩位呼叫-系统(Consecutive Speed Calling – System)
85、忙线停放(Camp-on Busy )
86、无条件呼叫转移-话音通告(Call Forwarding – All Calls – Announcement )
87、回叫-延迟(Call Back – Delayed)
88、无应答呼叫转移-外线(Call Forwarding - Don’t Answer – Outside )
89、呼叫转移至语音通告-话务台(Call Forwarding – Intercept/Announcement- Attendant)
90、呼叫等待指示灯-UCD(Call Waiting Lamp – UCD)
91、呼叫转移至目的分机(Call Forwarding – I am here)
92、集中用户交换业务兼容性(Centrex Compatibility)
93、呼叫转移-长途限制(Call Forwarding – Toll Restriction)
94、呼叫转移-无应答转向UCD队列(Call Forwarding - Don’t Answer To UCD Queue)
95、呼叫保留-会议(Call Hold – Conference)
96、 CS报告(CS Report)
97、呼叫限制(Call Block)
98、呼叫返回(Call Return)
99、呼叫保留代接(Call Hold Pick Up)
100、主叫方号码-姓名分配和显示(Calling Party Number – Name Assignment And Display)
101、呼叫追踪(Call Trace)
102、释放磋商保留(Consultation Hold Release)
103、按照服务功能类别实现呼叫转移(Call Forwarding By Service Feature Class)
104、呼叫重定向(Call Redirect )
105、消除主叫分机号码显示(Calling Station Number Display Elimination)
106、呼叫驻留组-Dterm( Call Park Group -Dterm)
107、在呼叫等待中的来电显示(Caller ID on Call Waiting )
108、呼叫话务台(Dial Access To Attendant)
109、监听功能选取(Dictation Access)
110、数字显示-分机(Digital Display – Station)
111、数字显示-中继(Digital Display – Trunk)
112、直接路由至分机(DIT)(Direct- in Termination)
113、直接拨入(DID)(Direct Inward Dialing)
114、直接拨出(DOD)(Direct Outward Dialing)
115、区分振铃(Distinctive Ringing)
116、免打扰- Dterm(Do Not Disturb - -Dterm)
117、拨号监控- Dterm(Dial Monitor -Dterm)
118、日/夜服务等级(Day/Night Class Of Service)
119、直接数字接口(Direct Digital Interface)
120、延迟语音通告-UCD(Delay Announcement – UCD)
121、相互保留- Dterm(Dual Hold-Dterm)
122、拒绝音分类(Denied Tone Classification)
123、线路双重占用保护(Double Seizure Protection)
124、内部呼叫(Dial Intercom)
125、延迟振铃- Dterm(Delay Ringing -Dterm)
126、延迟语音通告-话务台(Delay Announcement- Attendant)
127、直选控制台(Direct Station Selection (DDS)Console)
128、区分振铃-来电(Distinctive Ringing – Caller ID)
129、双重分机呼叫(Dual Station Call )
130、被叫号码基本限制(Dialed Number Primary Restriction)
131、通过远程选取记录数字公告中继(Digital Announcement Trunk Recording Via Remote Access)
132、多功能数字IP电话终端(Dterm IP)
133、动态拨号键盘-Dterm(Dynamic Dial Pad-Dterm)
134、区分振铃列表(Distinctive Ringing List )
135、针对长途呼叫的区分振铃(Distinctive Ringing For Toll Calls )
136、强插功能(Executive Right Of Way)
137、强插功能- Dterm (Executive Right Of Way-Dterm)
138、通话时间显示- Dterm(Elapsed Time Display-Dterm)
139、高级保留- Dterm(Exclusive Hold -Dterm)
140、紧急呼叫(Emergency Call )
141、 E911-ANI统一数字号码(E911-ANI Unified Number Of Digits)
142、可扩展多路操作- Dterm (Expanded Multiple Line Operation -Dterm)
143、灵活的分机编号(Flexible Numbering Of Station)
144、 FX选取(FX Access)
145、拍叉簧按键- Dterm(Flash Button -Dterm)
146、以拍叉簧为起始输入- Dterm (Flash Entry -Dterm)
147、灵活的振铃设置- Dterm(Flexible Ringing Assignment -Dterm)
148、错误中继报告(Faulty Trunk Report)
149、强制账户代码(Forced Account Code)
150、灵活的功能键设置(Flexible Assignment Of Function Buttons)
151、交换服务(Follow Phone)
152、灵活路由-FCCS(Flexible Routing – FCCS)
153、基于IP的FCCS网络(FCCS Networking Via IP)
154、 FCCS交替路由-备份(FCCS Alternate Routing – Backup )
155、群呼(Group Calling)
156、替代叉簧键的设定(Ground Button Access)
157、热线(Hot Line )
158、直接连接话务台(Horse phone)
159、免提通话- Dterm (Hands Free Answer Back -Dterm)
160、免提拨号/监听- Dterm(Hands Free Dialing / Monitoring -Dterm)
161、热线-外线(Hot Line – Outside)
162、 H.323终端支持(H.323 Terminal Support)
163、即时振铃(Immediate Ringing)
164、呼入识别(Incoming Call Identification)
165、中继汇接(Incoming Central Office Call To Tie Line Connection)
166、呼叫指定中继(Individual Trunk Access)
167、话务台间通话转移(Inter – Position Transfer)
168、呼叫指定话务台(Individual Attendant Access)
169、保留指示-Dterm (I – Hold Indication-Dterm)
170、使用指示- Dterm (I – Use Indication -Dterm)
171、内部通话呼叫(Intercom Calling )
172、分机号码显示- Dterm(Intermediate Station Number Display -Dterm)
173、内部摘机队列(Inter – Office Off - hook Queuing )
174、即时回铃音(Immediate Ringback Tone )
175、域内广播(Internal Zone Paging )
176、带VOIP功能的Dterm(IP Enabled -Dterm)
177、 IP控制-传真机(IP Control – Fax )
178、指定呼叫保留重叫定时器(Individual Call Hold Recall Timer )
179、指定呼叫限制(Individual Call Block )
180、 IP设备软件远程下载(IP Device Firmware Remote Download )
181、指示灯状态查看(Lamp Check )
182、线路锁定(Line Lockout )
183、经济路由-3/6位数字(Least Cost Routing – 3/6Digit )
184、末码重拨-单线分机(Last Number Call – Single – Line Station )
185、末码重拨- Dterm(Last Number Call -Dterm)
186、线路重新连接-同一线路- Dterm(Line Re – Connect To Same Line -Dterm)
187、线路重新连接-其它线路- Dterm(Line Re- Connect To other Line -Dterm)
188、线路预选- Dterm(Line Pre – selection -Dterm)
189、经济路由-按时间选择(Least Cost Routing – Time Of Day Routing )
190、线路负载控制(Line Load Control )
191、线路负载控制-自动(Line Load Control – Automatic )
192、线路负载控制-MAT(Line Load Control – MAT)
193、线路故障检测(Line Fault Detection )
194、目录表中的号码(Listed Directory Number )
195、 LDN夜间连接(LDN Night Connection )
196、 LDN夜间连接-外线(LDN Night Connection – Outside )
197、登出IP分机-呼叫目的(Logged Out IP Station – Call Destination )
198、广播寻找被叫方(Meet – me Paging )
199、多种中继选取(Miscellaneous Trunk Access )
200、多种中继选取限制(Miscellaneous Trunk Restriction )
201、多控制台操作(Multiple Console Operation )
202、保留音乐(Music On Hold )
203、广播寻找被叫方-话务台(Meet –me Paging – Attendant )
204、打印维护信息(Maintenance Printout )
205、维护管理终端(MAT – Maintenance Administration Terminal )
206、留言信息提示(Message Reminder )
207、留言信息提示- Dterm(Message Reminder -Dterm)
208、多线操作- Dterm(Multiple Line Operation -Dterm)
209、留言信息等待灯设置-话务台(Message Waiting Lamp Setting – Attendant )
210、多级呼叫转移-忙线(Multiple Call Forwarding – Busy )
211、多级呼叫转移-无应答(Multiple Call Forwarding - Don’t Answer )
212、信息中心接口(Message Centre Interface )
213、留言信息等待灯设置-分机 (Message Waiting Lamp Setting – Station )
214、多级呼叫转移-所有呼叫(Multiple Call Forwarding – All Calls )
215、人工发送信令(Manual Signaling )
216、多信道记录-DAT(Multi Channel Recording – DAT )
217、 MF信令-直接拨入(MF Signaling – DID )
218、留言信息等待灯- Dterm(Message Waiting Lamp Indication -Dterm)
219、多种保留音乐(Multiple Music – On Hold )
220、 MF ANI到SMDR(MF ANI to SMDR )
221、留言信息等待-特殊拨号音(Message Waiting – Special Dial Tone )
222、多种保留音乐(Multiple Music On Hold Source )
223、夜间模式连接-固定(Night Connection – Fixed )
224、夜间模式连接-灵活(Night Connection – flexible )
225、无延迟操作(Non – Delay Operation )
226、普通保留- Dterm(Non – Exclusive Hold -Dterm)
227、线路键灵活分配- Dterm(Non – Square Line Assignment -Dterm)
228、夜间模式外线连接-系统(Night Connection Outside – System )
229、姓名显示-系统(Name Display – System )
230、网络夜间模式交换(Network Night Switching )
231、在线维护(On- line Maintenance )
232、出中继队列(Outgoing Trunk Queuing )
233、出中继队列- Dterm(Outgoing Trunk Queuing -Dterm)
234、摘机警告(Off- Hook Alarm )
235、摘机队列- Dterm(Off – HooK Queuing )
236、队列溢出-UCD(Overflow –UCD )
237、话务员监控(Operator Monitoring )
238、重叠操作(Overlapping )
239、出中继队列-话务台(Outgoing Trunk Queuing – Attendant )
240、出中继忙线通告(Outgoing Trunk Busy Announcements )
241、摘机线路号码显示- Dterm(Off – hook Line Number Display -Dterm)
242、广播选取(Paging Access )
243、拨号音传递(Passing Dial Tone )
244、停电转接(Power Failure Transfer )
245、按键呼叫(Push Button Calling )
246、按键呼叫-仅限话务台(Push Button Calling – Attendant Only )
247、按键与脉冲之间转换(Push Button To Rotary Conversion )
248、话务统计(Peg Count )
249、优先权呼叫(Priority Call )
250、广播转移(Paging Transfer )
251、周期性通话提示音(Periodic Time Indication Tone )
252、主线路找接- Dterm(Prime Line Pickup -Dterm)
253、保密功能- Dterm(Privacy -Dterm)
254、保密线路- Dterm(Privacy On All Lines -Dterm)
255、保密释放(Privacy Release )
256、强插警告提示音(Periodic Warning Tone )
257、预设会议功能代码(Preset Conference )
258、错误拨号保护(Protection From Abnormal Dialing )
259、外线拨号音延迟设置(Protection From C.O.Dial Tone Delay )
260、优先权广播(Priority Paging )
261、键盘锁定(Pad Lock )
262、个性化振铃(personal Ringer )
263、点对点带宽控制(Peer To Peer Bandwidth Control )
264、不同号码的特色振铃-单线(Phantom Number Distinctive Ringing – Single Line )
265、系统远程访问(Remote Access To System )
266、备份电源(Reserve Power )
267、呼出限制(Restriction From Outgoing Calls )
268、脉冲拨号呼叫(Rotary Dial Calling )
269、多重路由(Route Advance )
270、远程维护(Remote Maintenance )
271、无线电广播(Radio Paging )
272、回叫计次(Reverted Call Metering )
273、路由限制-广播(Route Restriction – Announcement )
274、 RS-464A键盘(RS-464A PAD)
275、静音(Ringer Mute )
276、路由姓名显示(Route Name Display )
277、远程呼叫转移控制(Remote Call Forwarding Control )
278、远程呼叫保留(Remote Call Hold )
279、振铃线路代接- Dterm(Ringing Line Pick up-Dterm)
280、单数字号码分机呼叫(Single Digit Station Calling )
281、特殊拨号音(Special Dial Tone )
282、缩位拨号-系统(Speed Calling –System )
283、缩位拨号-系统- Dterm(Speed Calling –System -Dterm)
284、分离(Splitting )
285、分离- Dterm(Splitting -Dterm)
286、分机控制会议(Station Controlled Conference )
287、分机寻线-循环(Station Hunting – Circular )
288、分机寻线-备份寻线组(Station Hunting – Secretarial )
289、分机寻线-终端(Station Hunting – Terminal )
290、分机详情记录(SMDR)(Station Message detail Recording )
291、分机间直接呼叫(Station To Station Calling )
292、分机间通过话务员呼叫(Station TO Station Calling – Operator Assistant )
293、遇忙重选被叫分机(Step Call )
294、连续呼叫(Serial Calls )
295、单数字的功能码(Single Digit Feature Code )
296、缩位拨号-分机(Speed Calling – Station )
297、缩位拨号-系统(Speed Calling – System )
298、保存号码和重拨- Dterm(Save and Repeat -Dterm)
299、服务显示- Dterm(Service Display -Dterm)
300、单键缩位呼叫- Dterm(Speed Calling – One Touch -Dterm)
301、服务功能话务统计(Service Feature Peg Count )
302、虚拟线路码(Software Line Appearance )
303、 SMDR系统打印输出(Station Message Detail Recording System –Print out )
304、叉簧代替键设定(Short Break Hooking )
305、呼叫转移分离(Split Call Forward )
306、休息时间-免打扰(Slumber Time – Do Not Disturb )
307、连续拨号-- Dterm(Serial Call -Dterm)
308、缩位拨号强插-系统(Speed Calling Override – System )
309、分机5db键盘(Station 5db Pad )
310、连续呼叫-环路释放(Serial Call – Loop Release )
311、 SMDR输出扩展-ANI/CPN(SMDR Output Expansion – ANI/CPN )
312、可选分机呼叫代接(Selectable Station Call Pickup )
313、分机寻线-优先权(Station Hunting – Priority )
314、分机寻线-带优先权循环(Station Hunting – Priority With Switchhook )
315、侧音开/关- Dterm(Side Tone on/off -Dterm)
316、专线中继汇接-2/4线(Tandem Switching Of Tie Trunk )
317、三方呼叫(Three – way Calling )
318、三方呼叫- Dterm(Three – way Calling -Dterm)
319、专线选取(Tie Line Access )
320、专线连接增益控制(Tie Line Connection With Pad Control )
321、长途呼叫拒绝/转移(Toll Denial / Toll Diversion )
322、长途呼叫限制-3/6位(Toll Restriction –3/6Diqit )
323、任何分机应答中继呼入(TAS)(Trunk Answer From Any Station )
324、中继组忙线指示灯(Trunk Group Busy Lamp )
325、中继与中继连接(Trunk To Trunk Connection )
326、租户服务(Tenant Service )
327、时间显示(Time Display )
328、时间显示- Dterm(Time Display -Dterm)
329、中继线直接选取(Trunk Line Appearance )
330、第三方取消中继与中继连接(Trunk to Trunk – Third Party Cancellation )
331、定时提醒(Timed Reminder )
332、统一呼叫分配(UCD)(Uniform Call Distribution )
333、通用发号器(Universal Sender )
334、可变时间参数(Variable Timing Parameters )
335、语音呼叫(Voice Call )
336、语音呼叫- Dterm(Voice Call -Dterm)
337、音量控制- Dterm(Volume Control -Dterm)
338、在IP H.323连接上的通话(voice Over H.323 Connectivity )
339、 WATS选取(VATS Access )

二、交换机宾馆功能
1、自动唤醒(Automatic Wake- UP )
2、自动唤醒Dterm(Automatic Wake –up -Dterm)
3、带宾馆功能的话务台(Attendant Console With Hotel Functions )
4、审计报告(Audit Reports )
5、留言消息等待灯自动关闭(Automatic Message Waiting Lamp Off )
6、告警服务(Alert Service )
7、通过宾馆话务台的自动唤醒(Automatic Wake – up – Hotel Attendant )
8、拍叉簧应答驻留呼叫(Answering Camp – On/Call Hold Calls By Switchhook Flash )
9、自动客户语音邮件提取(Automated Guest Station Voice Mail Retrieval )
10、语音通告服务-客户(Announcement Service – Guest Station )
11、忙线状态-宾馆话务台(Busy Status – Hotel Attendant )
12、日程表显示(Calendar Display )
13、入住/退房(Check – in /Check out )
14、主叫分机号码显示(Calling Station Number Display )
15、被叫号码显示-宾馆话务台(Called Number Display – Hotel Attendant Console )
16、客房互连服务(Connecting Room Service )
17、呼叫信息显示(Call Information Display )
18、免打扰(Do not Disturb )
19、免打扰- Dterm(Do not Disturb -Dterm)
20、日/夜服务等级(Day /Night Class of Service )
21、直接广播连接(Direct Page Connection )
22、直接广播寻找(Direct Paging )
23、直接服务设置/重设(Direct Service Set /Reset )
24、直选分机(Direct Station Selection )
25、辅助目录接口(Directory Assistance Interface )
26、直选-外线(Direct Selection – Outside )
27、带宾馆功能的Dterm(Dterm With Hotel Functions )
28、直接数据输入-分机(Direct Date Entry – station )
29、客房组之间互连(Double Suite Room )
30、 DND/MW指示灯控制(DND/MW Lamp Control )
31、紧急呼叫监控-话务台(Emergency Call Monitor – Attendant )
32、客人/管理员服务等级(Guest / Administrative Service )
33、通过PMS的群组服务(Group Service Through PMS )
34、客人姓名显示- Dterm(Guest Name Display -Dterm)
35、客人信息显示- Dterm(Guest Information Display -Dterm)
36、客人信息显示-宾馆话务台(Guest Information Display – Hotel Attendant Console )
37、客人信息显示-PMS终端(Guest Information Display – PMS Terminal )
38、通过宾馆话务台的客房呼叫(Guest Room Calling – Hotel Attendant )
39、群组限制(Group Restriction )
40、客房分机- Dterm(Guest Station -Dterm)
41、热线(House Phone / Hotline )
42、在CCIS线路上的宾馆功能(Hotel Feature Transparency Over CCIS )
43、话务台间通话转移(Inter – Position Transfer )
44、语音服务(Language Service )
45、留言信息(Message Waiting )
46、房间状态(Maid Status )
47、外线呼入的人工交换(Manual Switching Of C.O. Incoming Call Destination )
48、房间状态-回应(Maid Status – Answerback )
49、摘机警告(Off- hook Alarm )
50、超时呼叫(Overtime Call )
51、打印机控制-宾馆话务台(Printer Control – Hotel Attendant Console )
52、 PMSS接口-BISYNC(PMSS Interface – BISYNC )
53、 PMS接口(PMS Interface )
54、语音广播控制台(Paging Console )
55、客房限制(Room Cutoff )
56、客房状态(Room Status )
57、客房编号(Room Numbering )
58、区分选取中继(Split Access to Outgoing )
59、屏蔽呼叫(Screening )
60、服务呼叫路由(Service Call Routing )
61、秘书服务-客人分机(Secretarial Service – Guest Station )
62、客房组服务(Suite Room Serviec )
63、二次唤醒呼叫-同一客人分机上(2nd Wake – up Call – Same Guest Station )
64、直选长途中继(Toll Terminal Access )
65、定时启动(Timing Start )
66、通过MCI的语音邮件服务(voice Mail Service Via Message Center Interface )
67、唤醒语音通告(Wake – up Announcement )

三、交换机ISDN功能：
1、交替路由(Alternate Routing – PRI /PRA )
2、自动呼叫分配(Automatic Call Distribution – PRI /PRA )
3、计费提示-显示(Advice of Charge – Display )
4、 SMDR计费提示(Advice of Charge SMDR )
5、语音通告服务(Announcement Service – PRI /PRA )
6、自动连接时间保证(Automatic Circuit Assurance – PRI /PRA )
7、自动中继测试(Automatic Trunk Test – PRI /PRA )
8、话务台停放来电并提示分机(Attendant Camp – on With Tone Indication –PRA )
9、话务台强插(Attendant Override –PRA )
10、老板/-秘书转移(Boss- Secretary Override – PRI /PRA )
11、老板-秘书强插功能(brokerage – Secretary Override – PRI/PRA)
12、热线功能-外线(brokerage Hot Line –Outside – PRA )
13、无条件呼叫转移(Call Forwarding – All Calls –PRI/PRA )
14、无条件呼叫转移- Dterm(Call Forwarding – All Calls -Dterm–PRI/PRA)
15、遇忙呼叫转移(Call Forwarding – Busy Line –PRI/PRA)
16、遇忙呼叫转移- Dterm(Call Forwarding – Busy Line -Dterm–PRI/PRA)
17、无应答呼叫转移(Call Forwarding – Do not Answer–PRI/PRA)
18、无应答呼叫转移- Dterm(Call Forwarding – Do not Answer -Dterm–PRI/PRA)
19、呼叫代接-群组 (Call Pick – up – Group–PRI/PRA)
20、呼叫代接-群组- Dterm(Call Pick – up – Group -Dterm–PRI/PRA)
21、呼叫转移-话务台(Call Transfer – Attendant PRI/PRA)
22、磋商呼叫保留(Consultation Hold – All Calls–PRI/PRA)
23、磋商呼叫保留- Dterm(Consultation Hold – All Calls -Dterm–PRI/PRA)
24、呼叫转移至语音通告(Call Forwarding – Intercept/Announcement–PRI/PRA)
25、呼叫代接-直接(Call Pick –up – Direct – PRI )
26、呼叫驻留(Call Park –PRI/PRA )
27、无条件呼叫转移-语音通告(Call Forwarding – All Calls – Announcement –PRE/PRA )
28、呼叫保留(Call Hold – PRA)
29、呼叫保留- Dterm(Call Hold -Dterm–PRA)
30、无条件呼叫转移-外线(Call Forwarding – All Calls –Outside –PRA)
31、遇忙呼叫转移-外线(Call Forwarding – busy Line – Outside – PRA )
32、无应答呼叫转移-外线(Call Forwarding – Do not Answer – Outside – PRA )
33、区分振铃(Distinctive Ringing–PRI/PRA)
34、免打扰- Dterm(Do not Disturb -Dterm–PRI/PRA)
35、直接路由至分机(DIT- PRI/PRA)
36、延迟通告-UCD (Delay Announcement – UCD – PRA )
37、通话时间显示- Dterm(Elapsed Time Display -Dterm–PRI/PRA)
38、灵活分机编号(Flexible Numbering of Stations–PRI/PRA)
39、错误中继报告(Faulty Trunk Report–PRI/PRA)
40、免提回应- Dterm(Hands – free Answer Back -Dterm–PRI/PRA)
41、热线-外线(Hot Line – Outside–PRI/PRA)
42、呼入识别(Incoming Call Identification–PRI/PRA)
43、专线连接的ISDN呼入(Incoming ISDN Call To Tie Line Connection -–PRI/PRA)
44、 PBX间的分机编号方案(Inter – PBX Coordinated Station Numbering Plan–PRI/PRA)
45、内部摘机队列(Inter – Office Off – Hook Queuing–PRI/PRA)
46、经济路由-3/6位(Least Cost Routing –3/6 Digit–PRI/PRA)
47、 LCR-按时间选择(LCR- Time of Day Routing –PRI/PRA)
48、 LCR-话务台人工强插(LCR – Attendant Manual Override–PRI/PRA)
49、 LCR-到DDD的自动溢出(LCR – Automatic Overflow to DDD–PRI/PRA)
50、 LCR-定时人工强插(LCR – Clock Manual Override–PRI/PRA)
51、末码重拨(Last Number Called –PRI/PRA)
52、末码重拨- Dterm(last Number Called - Dterm–PRI/PRA)
53、 LDN夜间连接(LDN Night Connection –PRI/PRA)
54、 LDN-夜间连接-外线 (LDN – Night Connection – Outside –PRI/PRA)
55、 LCR-指定线路警告音(LCR – special Line Warning Tone –PRI/PRA)
56、多种中继选取(Miscellaneous Trunk Access –PRI/PRA)
57、多种中继选取限制(Miscellaneous Trunk Restriction –PRI/PRA)
58、保留音乐(Music on Hold –PRI/PRA)
59、无条件多级呼叫转移(Multiple Call Forwarding – all Calls - –PRI/PRA)
60、忙线多级呼叫转移(multiple Call Forwarding – Busy Line –PRI/PRA)
61、无应答多级呼叫转移(multiple Call Forwarding - Don’t Answer –PRI/PRA)
62、夜间模式连接-固定的(Night Connection – Fixed –PRI/PRA)
63、夜间模式连接-灵活的(Night Connection – Flexible –PRI/PRA)
64、无延迟操作(Non – Delay Operation - –PRI/PRA)
65、夜间模式下转移至外线(Night Connection Outside – System –PRI/PRA)
66、出中继队列(Outgoing Trunk Queuing –PRI/PRA)
67、出中继队列- Dterm(Outgoing Trunk Queuing –- Dterm–PRI/PRA)
68、优先出中继队列(Outgoing Trunk Queuing – deluxe –PRI/PRA)
69、摘机队列(Off – hook queuing –PRI/PRA)
70、通过话务台的出中继队列(Outgoing Trunk Queuing – Attendant –PRI/PRA)
71、队列溢出-UCD(Overflow –UCD –PRI/PRA)
72、出中继忙线通告(Outgoing Trunk Busy Announcement –PRA )
73、话务统计(Peg Count –PRI/PRA)
74、指定呼叫限制(Primary Call Restriction –PRI/PRA)
75、键盘控制PRI/RRA中继到专线的连接(PRI/PRA Trunk to Tie Line Connection with Pad Control )
76、广播转移(Paging Transfer –PRI/PRA)
77、 PRI/PRA遇障重路由(PRI/PRA Failsafe Routing )
78、呼出限制(Restriction From Outgoing Calls –PRI/PRA)
79、系统远程访问(Remote Access to System – PRA )
80、缩位拨号-系统(Speed Calling – System –PRI/PRA)
81、缩位拨号-系统- Dterm(Speed Calling – System - Dterm–PRI/PRA)
82、 SMDR(Station Message Detail Recording –PRI/PRA)
83、缩位拨号-分机(Speed Calling – Station –PRI/PRA)
84、缩位拨号-群组(Speed Calling –Group –PRI/PRA)
85、缩位拨号强插-系统(Speed Calling Override – System –PRI/PRA)
86、分机指定中继选取(Station Individual Trunk Access –PRI/PRA)
87、专线中继汇接-2/4线(Tandem Switching of Tie Trunk –2/4 wire –PRI/PRA)
88、三方呼叫(Three – Way Calling –PRI/PRA)
89、三方呼叫- Dterm(Three – way Calling - Dterm–PRI/PRA)
90、长途呼叫拒绝/转移(Toll Denial /Toll Diversion –PRI/PRA)
91、长途呼叫限制-3/6位(Toll Restriction –3/6 Digit –PRI/PRA)
92、任何分机应答中继呼入(Trunk Answer from Station – PRA )
93、中继与中继连接(Trunk – to – trunk Connection – PRA )
94、统一编号方案(Uniform Call Distribution –PRI/PRA)

四、交换机智能共路信令网络功能：
1、带提示音的话务台停放(Attendant Camp-on With Tone Indication )
2、话务台控制建立会议(Attendant Controlled Conference )
3、自动呼叫返回(Automatic Recall )
4、自动号码识别(Automatic Number Identification )
5、 ANI-CCIS 16位数字(ANI – CCIS 16Digit )
6、分机忙线状态验证(Busy Verification )
7、热线(Brokerage – Hot Line )
8、回叫(Call Back )
9、无条件呼叫跟随(Call Forwarding – All Calls )
10、呼叫跟随-遇忙(Call Forwarding – Busy )
11、呼叫跟随-无应答(Call Forwarding - Don’t Answer )
12、呼叫跟随-空号(Call Forwarding – intercept )
13、呼叫跟随-强插(Call Forwarding – Override )
14、呼叫转移-全部(Call Transfer – All Calls )
15、被叫分机状态显示(Called Station Status Display )
16、主/被叫号码显示(Calling / Called Number Display )
17、呼叫过程指示(Call Processing Indication )
18、呼叫转移-话务台(Call Transfer – Attendant )
19、集中计费(Centralized Billing )
20、集中日/夜模式转换(Centralized Day /Night Mode Change )
21、集中系统管理报告(Centralized System Management Report )
22、磋商保留-所有呼叫(Consultation Hold – All Calls )
23、呼叫跟随分配-话务台(Call Forwarding Assignment – Attendant )
24、基于IP的CCIS网络(CCIS Network Via IP )
25、集中维护(Centralized Maintenance )
26、交替路由-备份(Alternate Routing – Backup )
27、外拨呼叫限制(Deluxe Traveling Class Mark )
28、直拨网内话务台(Dial Access To Attendant )
29、分机号码显示(Digital Display – station )
30、中继信息显示(Digital Display – Trunk )
31、直接拨入被叫分机(Direct – in Termination )
32、区分振铃(Distinctive Ringing )
33、免打扰- Dterm(Don’t Disturb - Dterm)
34、被叫号码显示-回叫(Dialed Number Display – Recall )
35、互相保留- Dterm(Dual Hold - Dterm)
36、强插功能(Executive Right Of Way )
37、通话时间显示(Elapsed Time Display )
38、灵活的分机编号(Flexible Numbering Of Station )
39、免提应答- Dterm(Hands – Free Answer Back - Dterm)
40、直接连接话务台(House Phone )
41、热线功能(Hot Line )
42、呼入识别(Incoming Call Identification )
43、呼叫指定话务台(Individual Attendant Access )
44、话务台间通话转移(Inter – Position Transfer )
45、指定中继选取(Individual Trunk Access )
46、预先设置路由(Look Ahead Routing )
47、 LDN夜间连接(LDN Night Connection )
48、留言信息提示(Message Reminder )
49、留言信息提示Dterm (Message Reminder Dterm)
50、留言等待灯设置-话务台(Message Waiting Lamp Setting – Attendant )
51、留言等待灯设置-分机(Message Waiting Lamp Setting – Station )
52、多种中继选取(Miscellaneous Trunk Access )
53、多种中继限制(Miscellaneous Trunk Restriction )
54、无条件多呼叫跟随(Multiple Call Forwarding – All Calls )
55、多呼叫跟随-遇忙(Multiple Call Forwarding – busy )
56、多呼叫跟随-无应答(Multiple Call Forwarding Don’t Answer )
57、多点话务台操作(Multiple Console Operation )
58、夜间模式连接-固定(Night Connection – Fixed )
59、夜间模式连接-灵活(Night Connection – Flexible )
60、姓名显示-OAI(Name Display – OAI )
61、姓名显示-系统(name Display – system )
62、节点号码限制(Node Number Suppression )
63、号码移植(Number Portability )
64、摘机队列(Off- Hook Queuing )
65、出中继队列(Outgoing Trunk Queuing )
66、广播选取(Paging Access )
67、呼出限制(Restriction From Outgoing Calls )
68、连续呼叫(Serial Call )
69、服务显示Dterm(Service Display Dterm)
70、单数字分机呼叫(Single Digit Station Calling )
71、分机控制建立会议(Station Controlled Conference )
72、分机间呼叫(Station to Station Calling )
73、通过话务员的分机间呼叫(Station to Station Calling – Operator Assistant )
74、遇忙重先被叫分机(Step Call )
75、监控通话(Supervisory Call )
76、呼出限制-3/6位数字(Toll Restriction –3/6digits )
77、任何分机应答中继呼入(Trunk Answer From Any Station )
78、统一编号方案(Uniform Numbering Plan )
79、语音呼叫(Voice Call )

五、交换机无线通信(PHS)功能：
1、自动语音通告-PS出服务区的中断(Automatic Announcement – Disconnected PS Out of Zone )
2、自动语音通告-被叫PS不在服务区(Automatic Announcement – Called PS Out of Zone )
3、 PS呼入转移(Call Forwarding PS Incoming Call Incomplete )
4、磋商保留(Consultation Hold )
5、呼叫停放组PS(Call Park Group )
6、群组呼叫-自动会议功能20方(Group Call – Automatic 20- Party Conference )
7、 PS位置显示(PS Location Information Display )
8、 PCS/PHS MFC信令(PCS/PHS MFC Signaling )
9、 Dterm上设定PS线路(PS Line Appearance On Dterm)
10、 PS两线操作(PS Two Line Operation )
11、带呼入寻线功能的PS群组呼叫(PS Group Call with Pilot Hunt Incoming Call )
12、 PS位置信息显示-PS-Dterm(PS Location Information Display –PS/-Dterm)
13、缩位呼叫-系统(speed Calling – System – PS )
14、无线模拟连接(Wireless Analog Adjunct Connection )

六、交换机自动呼叫分配(ACD)功能：
1、呼叫搜索取消(Abandoned Call Search )
2、 ACD座席助手(Assistance – ACD Agent )
3、自动应答(Automatic Answer )
4、登陆-ACD座席(Availability – ACD Position )
5、语音通告(Announcements )
6、座席个人队列(Agent Personal Queue )
7、基于PBX呼叫的自动工作模式(Auto Work Mode for PBX Calls )
8、模拟ACD终端(Analog ACD position )
9、夜间切换CCV(Alternate Night CCV )
10、座席位置移动(Agent Anywhere )
11、 ACD选取(ACD Access )
12、强插模式(Break Mode )
13、错误呼叫通知(Bad Call Notification )
14、座席呼叫分配(Call Distribution to Agents )
15、队列呼叫分配(Call Transfer to Split Queue )
16、呼叫等待指示-LCD显示/CW灯指示(Call Waiting Indication – LCD Display /CW Lamp )
17、主叫方识别(Calling Control Vector )
18、呼叫控制设施(Call Control Vector )
19、呼叫等待灯/提示音(Call Waiting Lamp with Chime )
20、呼叫转移-区分(Call Forwarding – Split )
21、呼叫恢复(Call recover )
22、连接显示(Connection Displays )
23、免打扰-区分(Do Not Disturb – Split )
24、紧急录音(Emergency /Recorder )
25、功能组-区分(Function Groups – split )
26、灵活ID号码(Flexible ID Codes )
27、节假日安排(Holidays Scheduling )
28、热线区分(Hot Split )
29、联络数据信息(Infolink Data Messages )
30、登录/登出 (Logon / Logoff )
31、缺省语言(Language Default )
32、登出警告(Logoff Warning )
33、监控-ACD管理(Monitoring – ACD Supervisor )
34、多客户组(Multiple Customer Groups )
35、多管理员(Multiple Supervisors )
36、 MIS操作员选择(MIS Operator Selection )
37、监控功能(Monitor Me )
38、多队列座席(Multi – Split Agent )
39、夜间服务(Night Service )
40、非ACD呼叫(Non – ACD Call )
41、外部溢出(Overflow Outside )
42、优先权队列(Priority Queuing )
43、代表号(Pilot Numbers )
44、个人紧急助手(Personal Emergency and Assist )
45、队列排队(Queuing )
46、呼叫释放(Release )
47、振铃延迟(Ring Delay )
48、区分队列(Splits )
49、 ACD位置区分显示 (Split Display – ACD Position )
50、区分选择(Split Selection )
51、标准呼叫路由(Stranded Call Routing )
52、中经故障报告-MIS(Trunk Trouble Report – MIS )
53、呼叫统计(Tally Count )
54、基于时间的路由分配(Time of Day / Week Routing )
55、呼叫代码统计(Tally – oh Codes )
56、统计需求(Tally Required )
57、工作模式(Work Mode )
58、工作模式的时间限制(Work Mode Time Limit )
59、自动应答模式下系统提示音(Zip Tone )

相关文章：
△如何购买交换机
△交换机解决方案
△JSY2100数字交换机

摘自相关技术杂志由亿泰网站整理
http://www.zjetime.com
转贴请说明来处

[关闭窗口] [交换机首页]

[网站地图]